Open CASCADE, the 3D modelling kernel
3D modeling & numerical simulation

Search the Forums
See All Topics
Open CASCADEShowroomGet it!Developer CornerSupport and ProductsAbout us
Technical overview
Areas of use
Advantages
FAQ
Screenshots
Shape factory
Shape gallery
Demonstrations
What's new
System requirements
Download Center
Public license
Documentation
Getting started
Forums
Open Source community
Training and e-learning
A-la Carte Support
Value-added software
Complementary Components
Customer Corner
Company Profile
Marketing Materials
Contact Us
News
Home / Developer Corner / Forums / Usage issues / Spur gear modeling

Spur gear modeling

Spur gear modeling
Ausekar Shashikant R 2012/12/30 17:16
Hello,
I am working on the project "Software development for spur gear design, modeling & drafting using OCCT & VS 2008". Pls mail me if anyone had idea about gear profile creation in OCCT. Its complicated to draw gear profile, dont know is it possible or not in OCCT 6.5.4.
Pls mail me your responce.

Thanks & Regards,
Shashikant
shashiauaekar@gmail.com
Sharjith Naramparambath 2013/03/14 18:28
It is indeed possible to create gear profile in OCC. Look at the sample application screenshots on OCC website.. CamshaftGear and CamShaftAssembly.
http://www.opencascade.org/support/products/advsamples/

To build a gear tooth profile you need to create the involute profile wire using gear calculations based on module pitch and dia etc. once you create the left profile you can mirror it about the tooth center line and then trim using the outer and inner circle. After that all you need is to copy-transform the number of teeth alon the circle and join them into a single wire. Then you could create a face from the wire and then extrude it to make a solid.

This link could give you more idea...
http://gtrebaol.free.fr/doc/catia/spur_gear.html
Though this is shown in CATIA, it should be fairly simple to use corresponding OCC APIs to generate the geometry.

Hope this helps
Regards,
Sharjith
Ausekar Shashikant R 2013/03/15 09:29
Hello Sharjith,
Thanks for your rpl. I have created 1 tooth for gear & I am searching for its tranaformmation thanks for ur help. cann u possible to send me ur email id..

Thanks in advance .
Sharjith Naramparambath 2013/03/18 23:24
You can do the transformation using BRep Transformations. Rotate the tooth about the axis passing from the center of the base circle and perp to the plane. You could email me at sharjith@outlook.com
jelle 2013/03/19 01:05
      FYI see parametricparts.com, which is built on top of OCC, developed by Dave Cowden.
Ausekar Shashikant R 2013/03/22 22:54
     Hello jelle ,

I didn't got exact idea what do you mean pls. explain what I have to search on parametricparts.com. Thanks on Ur rpl.

Sorry for my mistake in Email ID that is: shashiausekar@gmail.com
 
 
Latest news
  • Open CASCADE Technology 6.7.0 is available for download!
  • Open CASCADE Technology 6.6.0 is available for download!
  • Open CASCADE Technology 6.5.5 is available for download!

  • © OPEN CASCADE 2000 - 2014  |  Search  |  Contacts   |  Site map