| occ6.5.3 BRepAlgoAPI_Cut gives wrong result |
 |
| Jane Hu |
2012/08/14 21:53 |
I also found that BRepAlgoAPI_Cut code used to work for occ6.5.2, now using it with occ6.5.3 we have several testcases fail. It sends the shapes into the cutter, and did return a resultant shape, however, the BRepGProp::VolumeProperties(final_shape, myProps) returns myProps.Mass() = 0, which means the subject is gone after cut, which is wrong in many of our testcases.
I am not sure if the return shape is correct, just the volume property didn't get updated correctly or the return shape is wrong already, as in Timo's thread
http://www.opencascade.org/org/forum/thread_23599/?forum=3
Jane |
|
| |
| | Forum supervisor |
2012/08/15 10:55 |
Dear Jane Hu,
You also are welcome to register the issue in Mantis Bugtracker which is available via the Collaborative portal - http://dev.opencascade.org/index.php?q=home/get_involved.
Don't forget to put a data allowing to reproduce your case.
Regards |
|
| |
| | Jane Hu |
2012/09/05 21:43 |
Dear Forum Supervisor:
I've registered in the new website, however, it didn't grant me the right to report bugs.
Here, I attach 2 brep files, one contains a block, the other contains a sphere. They intersect each other. I want to use the box to cut the sphere, leaving part of the sphere as a result.
I used occ6.5.3, BRepAlgoAPI_Cut function, giving the from_shape as the sphere, and the tool_shape as the block. It returns a circular surface, instead of a solid.
This didn't happen in occ6.5.2 version.
Thanks for investigating it.
Jane |
|
You have to be logged in to download the attached file
|
|
| |
| | Jane Hu |
2012/09/05 21:44 |
| Another file is attached here. Thanks. |
|
You have to be logged in to download the attached file
|
|
| |
| | Pawel |
2012/09/06 12:19 |
There's been the following fix integrated into the master branch this Monday:
* 0023374: BOP Common between a sphere and a box gives wrong result
I haven't compiled it yet but it might address the issue.
Pawel |
|
| |
| | Forum supervisor |
2012/09/06 14:10 |
Dear Jan Hu,
I would like to inform you that:
- the bug is reproduced in OCCT 6.5.3;
- the problem does not reproduced in current Git master
(most likely Pawel is right that it was fixed by #23374);
- anyway registering an issue in Mantis would be useful as it would gave one more test case
- I suggest you to contact Bugmaster via "Contact Us" form on dev portal in case of any problems using Mantis. He will help you with pleasure.
Regards |
|
| |
| | Jane Hu |
2012/09/06 22:02 |
Thank you for both Pawel and Forum supervisor. I've downloaded the fix and verified it works.
I have another bug related to Unite operation, in which a wheel is cut into two parts, and now I want to unite them into a wheel. The boolean operation gives a part of the wheel's surface as the result of the boolean, which is obviously wrong. But seems a lot like this Cut problem where a surface is returned for a solid.
I am wondering if there's a fix for it too.
Here I attach both the parts and 'unite' fails. |
|
| |
|
|
