Open CASCADE, the 3D modelling kernel
3D modeling & numerical simulation

Search the Forums
See All Topics
 

problem with IGES file size

problem with IGES file size
Aditya Singh 2012/07/05 13:18
Hi
I have a problem with IGES file size as it is produced by open cascade 6.5.2

I have a PTC IGES file.
49HPro/ENGINEER by Parametric Technology Corporation,7H2008250,32,38,7, G 2

The size of file is around 412KB.
First i Import this file in ImportExport client of open cascade 6.5.2, but when i Export the same file in IGES format using open cascade client the resulting file size is over 3MB.
Is there is any issue with open cascade regarding ImportExport file.

Please help to resolve this issue if anybody knows the reason of this problem.

Thanks,
Aditya
PG 2012/07/05 13:39
Hi
Is it possible to share the PTC IGES file.
thanks
- pg
Aditya Singh 2012/07/06 12:43
Hi pg

Thanks for reply.

Here i attached one IGES file(bolt_Test.iges) created using NX7.5 which is of 76 KB, but when i Export it from open cascade ImportExport client the resulting file size is 105KB.

Thanks & Regards
Aditya
You have to be logged in to download the attached file
Roman Lygin 2012/07/05 13:47
Hi Aditya,

There are two most likely reasons:
1. By default, OCC splits C0 curves into C1 in reading. So this results in larger number of curves in the resulting OCC model, and respectively in the exported one.
2. If the original file misses either 2D or 3D representation of the edge curve, then OCC will compute it. Respectively when saving, both representations will be written.

HTH.
Roman
 
 
Latest news
  • Open CASCADE Technology 6.8.0 is available for download!
  • New features to enhance the development process
  • Open CASCADE Technology 6.7.1 is available for download!

  • © OPEN CASCADE 2000 - 2014  |  Search  |  Contacts   |  Site map