Open CASCADE, the 3D modelling kernel
3D modeling & numerical simulation

Search the Forums
See All Topics
 

Configure before build

Configure before build
Satchitanand Kashyap 2010/05/18 05:25
Hi:

I did not follow the README.txt in using these flags in ./configure, I dont have TCl/TK installed, How do I use the flags listed in README.txt file. I dont have /bin in the ros directory. the bin in directory in $CASROOT/ros/win32/bin is empty. How do I use these flags to ./configure

The flags listed in README.txt are these

flags="--with-gl-include=/usr/include --with-gl-library=/usr/lib"
16 flags="$flags --with-xmu-include=/usr/X11R6/include/X11"
17 flags="$flags --with-xmu-library=/usr/X11R6/lib"
18 flags="$flags --with-tcl=${TCLHOME}/lib"
19 flags="$flags --with-tk=${TCLHOME}/lib "
20 flags="$flags --disable-debug --enable-production"
21 where:
22 --enable-debug=yes/no - building in debug mode (yes: set -g key of compiler).
23 --enable-production=yes/no - building in optimize mode  (yes: set -O key of compiler).
24
25 Additional flags
26
27 --enable-wrappers=yes/no - to build or not jcas
28 --enable-wok=yes/no - to build or not WOK
29 --enable-draw=yes/no - to build or not DRAW


Thanks for your help.

Regards,
Satchit
 
 
Latest news
  • Open CASCADE Technology 6.8.0 is available for download!
  • New features to enhance the development process
  • Open CASCADE Technology 6.7.1 is available for download!

  • © OPEN CASCADE 2000 - 2014  |  Search  |  Contacts   |  Site map