Open CASCADE, the 3D modelling kernel
3D modeling & numerical simulation

Search the Forums
See All Topics
 

Maybe a Bug: when use BRepBuilderAPI_MakeFace to make a TopoDS_Face from a TopoDS_Wire

Maybe a Bug: when use BRepBuilderAPI_MakeFace to make a TopoDS_Face from a TopoDS_Wire
zhangzhigang824 2009/06/21 04:31
Hi everyone,

I use the followed code to make a AIS_Shape and display it.

Standard_Real myData[25][3] = {
          {10.671875, 5.500000, 300},
          {15.234375, 8.703125, 300},
          {19.953125, 15.250000, 300},
          {21.328125, 24.390625, 300},
          {21.031250, 38.562500, 300},
          {23.156250, 37.187500, 300},
          {28.796875, 37.187500, 300},
          {30.015625, 38.562500, 300},
          {32.296875, 36.734375, 300},
          {31.078125, 35.812500, 300},                    
          {31.078125, 8.390625, 300},          
          {33.828125, 8.390625, 300},
          {34.734375, 8.703125, 300},
          {35.187500, 12.359375, 300},          
          {35.953125, 11.890625, 300},
          {36.406250, 9.000000, 300},
          {37.484375, 8.703125, 300},
          {36.406250, 6.718750, 300},          
          {28.953125, 6.718750, 300},          
          {28.953125, 36.265625, 300},
          {23.312500, 36.265625, 300},
          {23.468750, 23.171875, 300},
          {21.781250, 14.187500, 300},
          {15.546875, 7.171875, 300},
          {11.125000, 5.046875, 300}          
     };
     BRepBuilderAPI_MakePolygon myPolygon;
     for (int i=0; i<25; i++)
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;{
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;gp_Pnt pnt(myData[i][0],myData[i][1],myData[i][2]);
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;myPolygon.Add(pnt);&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;}
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;myPolygon.Close();
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;TopoDS_Wire myWire = myPolygon.Wire();
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;TopoDS_Face myFace = BRepBuilderAPI_MakeFace(myWire);
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Handle(AIS_Shape) aAISShape = new AIS_Shape(myFace);
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;m_hContext->Display(aAISShape);

The shape can be displayed, but it is so surprising, because it is not what we we expected for. I am sure the data is correct. Curiously, the TopoDS_Wire is displayed all right. I think this is a bug of OpenCasCade.

who can give me some advice?
Thanks in advance.

Yaron 2012/11/19 10:06
I also encountered with the same issue!
I'm using OCCT v6.5.3
any news regarding it?
Thanks
Forum supervisor 2012/11/19 11:15
Dear zhangzhigang824,
From your post is not clear which result is expected by you and what is really wrong.
At least the result got by me looks acceptable.
See the attached picture (face and wire).
Both shape are valid.
Regards
You have to be logged in to download the attached file
 
 
Latest news
  • OCCT Applications
  • Open CASCADE Technology 6.8.0 is available for download!
  • New features to enhance the development process

  • © OPEN CASCADE 2000 - 2014  |  Search  |  Contacts   |  Site map